30 Degree Stainless Steel Elbow

Product Information

1.Deg:15,30,45,60,90,180
2.Grade:310S,309S,316,316L,321,347H,304,304L,201

3.OD:1/8"-100",5S-160S

Product Information

316 Stainless Steel Flat Bar

Size:5-50mm*5-50mm

Length:according to customers' requirement

Standard:ASTM,JIS,AISI ect.

Brand:JISCO.TISCO,JPSS ect.

Chemical Composition

TYPE NO.	C	Mn	P	S	Si	Cr	Ni	Mo
201	<=0.15	5.5-7.5	<=0.05	<=0.03	<=1	16-18	3.5-5.5
202	<=0.15	7.5-10	<=0.06	<=0.03	<=1	17-19	4-6
301	<=0.15	<=2	<=0.045	<=0.03	<=1	16.5-18	6-8
302	<=0.15	<=2	<=0.045	<=0.03	<=1	17-19	8-10
304	<=0.08	<=2	<=0.045	<=0.03	<=1	18-20	8-10.5
304L	<=0.03	<=2	<=0.045	<=0.03	<=1	18-20	8-12
308	<=0.08	<=2	<=0.045	<=0.03	<=1	18-21	10-12
310S	<=0.08	<=2	<=0.045	<=0.03	<=1	24-26	19-22
316	<=0.08	<=2	<=0.045	<=0.03	<=1	16-18	10-14	2-3

316L	<=0.03	<=2	<=0.045	<=0.03	<=1	16-18	10-14	2-3
321	<=0.08	<=2	<=0.045	<=0.03	<=1	17-19	9-12	Ti>S*C%

Surface Finish

Surface	Characteristics	Application
NO.1	Finished by hot-rolling,and packing, characterized by white picked surface	Chemical industry equipment,industrial tanks
2B	Finished by heat treatment,pickling after cold rolling,followed by skin pass ine to be more brighter and smooth surface	General application medical General application medical
BA	Bright heat treatment after cold rolling	Kitchenware, architectural purpose
NO.4	Polishing with NO.150 to NO.180 mesh abrasives the most popular finishes	Milk&Food processing acidites,hospital equipment,bath-tub
Mirror	A mirror-like reflective surface by polishing with finer abrasives over 800 mesh	Reflector,mirror,interior -exterior decoration for building
HL	Finished by continuous liner polishing	Architectural purposes, escalators,kitchenware vehicles

Packaging

Packagings of Stainless Steel Pipes/Tubes Please don’t worry that our products are packed, stored, transported according to the international regulation. We do care about the quality of our products; even some little details are paid attention to. We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage. Identification labels are tagged according to standard specification or customer's instructions. Special packing is available as per customer's requirement. Plus, our storage racks are made of wood. Other kinds of metals are settled in other places, far from the stainless steel. Any unwanted chemical reaction can be prevented.

Manufacting Process

Raw materials are sending to hot rolling units for rolling into different sizes.

Hot rolled material is annealing in cold rolled annealing furnace and pickling in acid.

All mill rolls are grinded on precision grinding machine with proper chamfering after first shift operation.

All sheets are pickled in different tanks and dried on brush roll machine before dispatched.

30 Degree Stainless Steel Elbow

Related suggestion